Stripping and Sealing

This process involves using a stripping solution which is applied to the floor and then scrubbed using a slow speed polisher to remove the old seal. The floor is then rinsed with clean water and then let to dry. A high speed burnisher is then used to remove any remaining water from the vinyl. The sealer is then applied to the surface. Each coat requires several hours to dry depending on temperature and humidity. A minimum of four coats of polish/seal is applied. After several days or a minimum of 24hrs after application the floor is then ready to be polished using a high speed burnisher.

              QUALITY WORK ALWAYS PROVIDED 

Care and maintenance of vinyl floors in low traffic areas involves just a mop with a neutral based detergent so as not to react with the sealer/polish. With low traffic areas a light scrub with a low speed scrubber and a polish with a high speed burnisher. With high traffic areas such as shopping centres a scrub will be required every day and then shined up with a high speed burnisher eg. Shopping centres.